Citroen C3: Changing a fuse / Access to tooling
The extraction tweezers are fitted to the back of
the dashboard fusebox cover.

- Unclip the cover by pulling at the top left, then
right.
- Disengage the cover completely and turn it
over.
- Remove the tweezers from the back of the
cover.

The extraction tweezers are fitted to the back of
the dashboard fusebox cover.
- Open the glove box lid.
- Unclip the fusebox protection cover.
- Disengage the cover completely and turn it
over.
- Remove the tweezers from the back of the
cover.
Before changing a fuse:
Identify the cause of the fault and fix it.
Stop all power consumption.
Immobilise the vehicle and switch the ignition
off...
Other information:
These illustrations and descriptions are intended
as a guide. The presence and location of some
elements vary depending on the version or trim
level.
Door mirrorsBlind Spot Monitoring System
Electric windows
Bonnet release
Dashboard fuses
Courtesy lampInterior rear view mirror
Emergency or assistance call
Warning lamps display for seat belts and front passenger airbag
CITROËN ConnectedCAM..
Courtesy lamp (W5W)
Using a thin, flap tip screwdriver, unclip the
entire console surrounding the courtesy lamp.
Remove the defective bulb and replace it.
Fit the console back into place around the
courtesy lamp and clip it correctly.
Courtesy lamp with LEDs
For the replacement of LEDs, contact a
CITROËN dealer or a qualified workshop.
Boot (W5W)
Unclip the unit by pushing the base ..