These dimensions have been measured on an
unladen vehicle.
Other information:
With the parking brake applied:
With a manual gearbox, place the gear lever
in neutral then fully depress the clutch pedal.
With an automatic gearbox, place the gear
selector in mode N or P then fully depress the
brake pedal.
Insert the key into the ignition switch; the
system recognises the code...
Before switching off the engine, it is possible to
engage position P or N to place the gearbox in
neutral.
In both cases, apply the parking brake to
immobilise the vehicle, unless it is programmed
to automatic mode.
If the selector is not in
position P, when
the driver's door is opened or
approximately 45 seconds after the ignition is
switched off, an audible signal sounds and a
message ..