Other information:
The compressor can be used, without
injecting sealant, to check and, if necessary,
adjust the tyre pressures.
Remove the valve cap from the tyre and keep
it in a clean place.
Uncoil the pipe stowed under the compressor.
Screw the pipe onto the valve and tighten
firmly.
Check that the compressor switch is in 8
position "O".
Fully uncoil the electric cable stowed under
the compressor..
In some weather conditions
(e.g. low
temperature or humidity), misting on the
internal surface of the glass of the headlamps
and rear lamps is normal, and will disappear
after the lamps have been on for a few
minutes.
The headlamps have
polycarbonate
lenses with a protective coating:
Do not clean them with a dry or abrasive
cloth, nor with detergent or solvent
products.
Use a sponge ..