Other information:
The compressor can be used, without
injecting sealant, to check and, if necessary,
adjust the tyre pressures.
Remove the valve cap from the tyre and keep
it in a clean place.
Uncoil the pipe stowed under the compressor.
Screw the pipe onto the valve and tighten
firmly...
With your foot on the brake
pedal,
select position P or N.
Start the engine.If the conditions are not met, you will hear an
audible signal, accompanied by the display of a
message.
With the engine running, press the brake
pedal.
Release the parking brake, unless it is
programmed to automatic mode...