Citroen C3: Telephone / Android Auto smartphone connection
On the smartphone, download the
Android Auto application.
The "Android Auto"
function requires the
use of a compatible smartphone and
applications.
California apostille. Birth certificate apostille. Apostille documents. www.globalapostille.us
Telephone not connected by Bluetooth®
Connect a USB cable. The
smartphone
charges when connected by a USB cable.
From the system, press "Telephone"
to
display the main page.
Press "Android Auto" to
start the
application in the system.
Depending on the smartphone, it may be
necessary to activate the "Android Auto"
function.
During the procedure, several
screen
pages relating to certain features are
displayed.
Accept to start and complete the connection.
When connecting a smartphone to
the
system, we recommend enabling
Bluetooth® on the smartphone.
Telephone connected by Bluetooth®
From the system, press "Telephone"
to
display the main page.
Press the "PHONE" button to display the
secondary page.
Press "Android Auto" to
start the
application in the system.
Access to the different audio sources remains
available in the margin of the Android Auto
display, using the touch buttons located in the
upper bar.
Access to the menus for the system is possible
at any time using the dedicated buttons.
There may be a pause
before
applications become available,
depending on the quality of the network.
USB sockets
Depending on equipment, for more information
on the USB sockets compatible with the
CarPlay®, MirrorLinkTM or Android Auto
applications, refer to the "Ease of use and
comfort" section...
The services available
depend on the
network, the SIM card and the
compatibility of the Bluetooth devices used.
Consult the telephone user guide and the
service provider to check which services are
available...
Other information:
Before switching off the engine, it is possible to
engage position P or N to place the gearbox in
neutral.
In both cases, apply the parking brake to
immobilise the vehicle, unless it is programmed
to automatic mode.
If the selector is not in
position P, when
the driver's door is opened or
approximately 45 seconds after the ignition is
switched off, an audible signal sounds and a
message ..
To avoid causing a nuisance to other road users,
the height of the headlamp beams should be
adjusted according to the load in the vehicle.
0. (Initial adjustment)
Driver only or driver + front passenger
-. Driver + front passenger + rear passengers
1. Driver + front passenger + rear passengers +
load in the boot
-. Driver + front passenger + rear passengers +
load in the boot
2. Driver onl..