Citroen C3: CITROËN Connect Nav

GPS navigation - Applications - Multimedia audio system - Bluetooth®
telephone
The functions and settings
described
vary according to the vehicle version and
configuration.
For safety reasons and
because they
require sustained attention by the driver,
the following operations must be carried out
with the vehicle stationary and the ignition
on:
- Pairing the smartphone with the system in
Bluetooth mode.
- Using the smartphone.
- Connection to the CarPlay®, MirrorLinkTM
or Android Auto applications (certain
applications interrupt their display while the
vehicle is moving).
- Changing the system settings and
configuration.
The system is protected so
that it only
operates in the vehicle.
The message Energy Economy Mode is
displayed when the system is about to enter
the corresponding mode.
System and map updates can
be
downloaded from the Brand’s website.
The update procedure is also available on the
website.
The system’s Open Source
Software
(OSS) source codes are available at the
following addresses:
https://www.groupe-psa.com/fr/oss/
https://www.groupe-psa.com/en/oss/
The following information groups together the
answers to the most frequently asked questions
concerning the system.
Radio
The reception quality of the tuned radio
station gradually deteriorates or the station
presets are not working (no sound, 87...
With the engine running, a press
mutes
the sound.
With the ignition off, a press turns the system on.
Adjustment of the volume.
Use the buttons either side of or below the touch
screen for access to the menus, then press the
virtual buttons in the touch screen...
Other information:
Before switching off the engine, it is possible to
engage position P or N to place the gearbox in
neutral.
In both cases, apply the parking brake to
immobilise the vehicle, unless it is programmed
to automatic mode.
If the selector is not in
position P, when
the driver's door is opened or
approximately 45 seconds after the ignition is
switched off, an audible signal sounds and a
message ..
The reset is performed when the trip counter is
displayed.
Press the button on the end of the wiper
control stalk for more than two seconds.
Press the thumbwheel on the steering wheel
for more than two seconds.
Press this button for more than 2 seconds.
..